Recycling And End Of Product Life; Spare Parts; Sectional Drawing And Bill Of Material - salmson NOLH Installation Et Mise En Service

11 RECYCLING AND END OF PRODUCT LIFE
At the end of the service life of the equipment or its
parts, the relevant materials and parts should be recycled
or disposed of using an environmentally acceptable
method and in compliance with local regulations. If the
pump contains substances that are harmful to the
environment, these should be removed from the pump and disposed of
in compliance with current local regulations. This also applies to liquids
and/or gases that may be used in auxiliary sealing systems.
Even when dismantled from the process line the pump may
contain a part of pumped fluid. Make sure that dangerous liquids
have been eliminated. Security requirements available in the fluid safety
datasheets should be respected. Suitable personnel protective
equipment should be used when dismantling the pump.
All manuals and user guides at all-guides.com
23
12 SPARE PARTS
12.1 SECTIONAL DRAWING AND BILL OF
MATERIAL
The pump sectional drawing and bill of material is available
upon request. The demand should be sent to our Spare
parts Dpt. and should mention pump description and serial number.
Data are engraved on the pump name plate and available in the
acknowledgement of order.
ENGLISH