Operation; General; Pd 5001, Pd 5006; Pd 5101; Pd 5106 - Heidolph PD 5001 Mode D'emploi

6. General

Before running the item, read all of the safety and general information !
Before connecting your item with your local power supply, make sure item has been
designed and wired for your voltage and frequency. Use your national standard plugs.
For more information refer to Chapter "General Information".
Connect with mains.
-
7. PD 5001, PD 5006 (fig. 44)
Power switch (29) on control panel starts pump rotation.
-
Select speed with selector knob (30).
-
Feed rate is proportional with pump speed. Go by rpm scale on the item. For more
-
information about exact speed refer to reference tables in Chapters 17 and 18.
Select sense of rotation with switch (31); (go by arrow marks).
-
29
31
8. PD 5101; PD 5106 (figs 45, 46)
PD 5101 and PD 5106 pump drives are splash proof (IP 55).
-
Service work is limited to expert personnel authorized to do so by Heidolph.
Keep interface connector (37) closed all the time by either an interface plug or a
blind plug, not to void splash protection.
B. OPERATION
57
30
fig. 44
IEI