Part List Glass Set V-Micro; Controls And Operation - Heidolph VV Micro Mode D'emploi

E
9.

Part list Glass set V-Micro

Order number
514-40000-00
514-72100-00
514-71100-00
514-70100-00
514-33000-00
514-45000-00
514-20000-00
514-46000-00
514-50000-00
514-82100-00
514-81100-00
514-80100-00
514-34000-00
Important:
It is imperative to read the section „Safety instructions" and „General
information" before you use the appliance for the first time.
Before connecting the appliance to the power supply, make sure that
your supply voltage is the same as that on the rating plate of the
appliance. Use plugs approved for your country. In this connection,
please read the note in the section „General" on page 19.
Check all components and make sure they are in working order!
o
Check all connections for leaks.
o
Add water to the heating bath. The minimum/maximum volumes of the heating
o
bath refer to the liquid level with the evaporating flask immersed.
Run water or an alternative liquid through the condenser.
o
Add solution to the evaporation flask.
o
The depth of immersion of the evaporation flask in the bath liquid is set by vertical
o
adjustment of the complete drive. Holding the drive unit (3) securely, slacken the
Item Description
A+B Vapor tube with Support ring
C Evaporation flask 250 ml
D Evaporation flask 100 ml
E Evaporation flask 50 ml
F Transition piece NS 14,5
G + G1 Butt flange with Seal for butt flange
H Cooler K-micro
I + I1 Screw connection cap with Seal
K + K1 Inlet tube with Valve
L Collection flask 250 ml
M Collection flask 100 ml
N Collection flask 50 ml
O Vacuum cap

CONTROLS AND OPERATION

Use the locating knob (16) and star
o
grip (5) to position the evaporation
flask in the heating bath with a
safety clearance of at least 10 mm
between the flask and the bath wall
(see detail view on page 14). The
flask rotation switch (17) is not to
be used before this point.
When using to de-ionized or distilled water:
o
16
Add 0,2% borax (Na B O * 10 H
2 4 7
24
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
O)
2