Heidolph PD 5001 Mode D'emploi page 58

IEI
Item's master switch (29) is located on the rear
-
panel. LED (40) for sense of rotation in ON.
Set speed with speed selector (30) on the control
-
panel.
Feed rate is proportional with pump speed. Go
-
by rpm scale on the item. For more information
about exact speed refer to "Specifications"
section.
33
40
31
40
Select sense of rotation with switch (31); (go by arrow marks). Sense of rotation may be
-
changed on standstill only.
Caution! Hit Stop key (32) before changing sense of rotation, select new sense of
rotation and restart.
Sense of rotation selected is confirmed by LEDs (40).
-
Start pump with „Start Stop" key (32). Pump status is confirmed by an LED (44).
-
To stop pump rotation, hit „Start Stop" key (32) once more.
-
When hitting „max." key (33), pump will run at max. speed as long as this key is held
-
depressed; this feature eases filling or draining hoses without any change to basic settings.
Bild 46
44
32
58
29
37
30: Rotation speed
31: Direction of rotation
32: Start/Stop
33: Maximal
30
conveyance
fig. 45