Cooking Tips; Additional Features; Optional Accessories - Redmond RMC-250E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
"BREAD" Programme
The programme is recommended for baking different types of bread from wheat and with addition of rye flour. The programme includes
proofing and baking cycles. Default time is 2 hours. Cooking time of the programme can be adjusted between 1 and 6 hours in 10
minute increments. The "Keep Warm" and "Time Delay" functions are not applicable for the programme.
CAUTION! Use oven mitts when handling the inner bowl and removing bread out of the appliance.
"DESSERT" Programme
The programme is recommended for making desserts. Default time is 30 minutes. Cooking time of the programme can be adjusted
between 5 minutes and 3 hours in 5 minute increments.
"EXPRESS" Programme
The programme is recommended for making side dishes of quick-cooking grains. Default time is 20 minutes. Cooking time of the
programme cannot be adjusted. The "Time Delay" function is not applicable for the programme. Follow steps 1-2 of the "Standard
Operating Procedure for Automatic Programmes", then follow steps 6-8 (skipping steps 3-5).
III. ADDITIONAL FEATURES
Proofs dough.
Makes cheese.
Sterilizes tableware and personal items.
Pasteurizes liquid foods.
Reheats baby food.
IV. OPTIONAL ACCESSORIES
Additional accessories are not included into the supply package of the REDMOND RMC-250E multicooker, they can be purchased
separately. You can obtain all the necessary information on the innovations and make an order through www.multicooker.com and our
authorized dealers.
V. GENERAL MAINTENANCE GUIDELINES
Before cleaning the appliance, ensure that it is unplugged and has cooled down. Prior to the first use or in order to remove the odour
after cooking, wipe the bowl and the inner lid of the appliance with vinegar-water solution and steam half a lemon for 15 minutes
using the "STEAM" programme. Use a soft cloth and mild soap to clean. It is recommended to clean the appliance after each use.
Do not use a sponge or tissue with hard or abrasive surface or any chemically aggressive substances to clean the appliance. Do not
immerse or wash it under running water.
Clean the housing when necessary. Clean the inner bowl after each use. The bowl is dishwasher safe. By the end of cleaning wipe the
outer surface of the bowl dry. Clean the inner aluminum lid after each use (not dishwasher safe):
1. Open the main lid. Pull the inner lid up, holding it by two plastic holders located on its lower part, to detach from the main lid.
2. Wipe the surface of the inner lid with a damp cloth. If necessary, wash with warm water and mild soap.
3. Position the aluminum lid into the upper slot, align with the main lid, and push plastic holders until the the lid clicks into place.
Clean the steam release valve after each use:
1. Detach the inner aluminum lid and gently pull the valve, holding it by the ledge, to remove. Rinse the valve under running
water.
2. Let dry and place back into its original position.
Condensate accumulates in the condensation collector, located on the back of the unit.
1. Pull condensation collector toward yourself to remove.
2. Pour out the condensate. Rinse the collector, following the cleaning guidelines provided, and position it back into place.
Compliance with the user manual guidelines minimizes the risk of food particles or liquids accumulating inside the cooking chamber.
However, if the inside of the chamber gets dirty, clean it to prevent improper operation or malfunction of the unit.
Before cleaning the cooking chamber ensure that the multicooker is unplugged and has cooled down thoroughly!
Walls of the cooking chamber, the surface of the heating disc, and the casing of the central thermal sensor (located in the middle of
the heating disc) need to be cleaned with a damp (not wet!) sponge or cloth. Remove any traces of soap or detergent if using any to
prevent extraneous odours during cooking.
If there is a foreign object in the cavity around the central thermal sensor, carefully remove it using tweezers, trying to avoid pressing
on the casing of the sensor. Clean the heating disc with a damp medium-hard sponge or a synthetic brush, if necessary.
When the multicooker is used on a regular basis, the heating disc may partially or completely change colour, which does not indicate
a defect and does not affect the operation of the unit.
8
VI. COOKING TIPS
Common Cooking Mistakes and Ways of Solving Them
This chapter familiarizes you with the practical tips and solutions to some common problems you may experience when using the
multicooker.
THE DISH IS UNDERCOOKED
Possible causes
The lid of the device was open or was not closed properly, so the
cooking temperature was not high enough
Cooking temperature was not observed because the bowl and
the heating element did not fit tightly
Wrong ingredients or settings were chosen.
General proportions were not observed, the foods were cut into
pieces that are a bit too big.
Wrong time settings.
Chosen recipe is not appropriate for the appliance
Steaming: the amount of water in the bowl is not enough to
provide enough steam density
Too much vegetable oil was added
Frying
Too much liquid inside the bowl
Boilng: the broth boiled away while cooking acidic foods
While proving the dough has reached the inner
lid and covered the steam valve
Baking (dough
failed to bake
through)
Too much dough in the bowl
THE DISH IS OVERCOOKED
Wrong ingredients or time settings, the foods were cut into
pieces that are a bit too small
The dish was in the bowl on the Keep Warm function for too long
after being cooked
LIQUID BOILS AWAY WHILE COOKING
Milk boils away
Foods were not properly processed (were not rinsed well, etc.).
Wrong general proportions or ingredients
Solutions
Try to avoid opening the lid while cooking.
Close the lid until it clicks into place. Make sure that the rubber sealing
ring located on the inner side of the lid is not deformed or damaged in
any way
There should not be any foreign objects between the lid and the housing
of the device, remove if any.
Always make sure that the heating element is clean and fits tightly with
the bowl before cooking
We recommend that you use recipes adapted for the device. Choose
proven recipes only.
Set the time and cooking programme, choose ingredients, proportions,
and the size of pieces according to the recipe
Use the amount of water recommended. If in doubt, check the water
level while steaming
For regular frying add an amount of vegetable oil just enough to cover
the bottom of the bowl.
Follow recommendations given in the recipe while deep frying
Do not close the lid of the device while frying unless specified in the
recipe. Defrost and let drain the ingredients before frying
Certain foods need to be washed or sautéed before cooking. Follow
recommendations given in the recipe
Use a smaller amount of dough
Take the product out of the bowl, turn it over and place back. Bake until ready.
Next time use smaller amount of dough
We recommend that you use the recipes adapted for your model.
Set the time and cooking programme, choose ingredients, proportions
and the size of the pieces according to the recipe
We recommend that you use the Keep Warm function mode moderately. If your
device enables you to switch "Keep Warm" off in advance, use it to avoid the
problem
Depending on both quality and properties of the milk used, it may boil
away. To avoid this, we recommend that you use only ultra-pasteurized
skimmed milk. Mix the milk with some water if needed
We recommend that you use the recipes adapted for the device. Try
choosing proven recipes only. Set the time and cooking programme,
choose ingredients, proportions, and the size of the pieces according to
the recipe.
Whole grains, meat, fish, and seafood need to be thoroughly rinsed before
cooking

Publicité

Chapitres

Table des Matières
loading

Table des Matières