Operating Menus And Input Window; System Parameters; 18 8.3.3 "Calib. Temperature; 19 8.3.5 „Manual Operation - Sartorius Stedim Biotech CERTOMAT Tplus Mode D'emploi

8.3

Operating Menus and Input Window

8.3.1 "System Parameters"

After pressing the "System Parameters" key and
subsequent entry of the standard password the
following settings can be carried out:
Field Value
hh:mm:ss
Time
yyyy-mm-dd
Date
hh:mm:ss
Failtime
IP-Adresse
Internet
Config
enable/ disable
Beeper
8.3.2 "PV Ranges"
Only authorized personnel (service technicians) are
allowed to carry out settings in this menu.
8.3.3 "Calib. Temperature"
Only authorized personnel (service technicians) are
allowed to carry out settings in this menu.
8.3.4 "Service"
Only authorized personnel (service technicians) are
allowed to carry out settings in this menu.
8.3.5 „Manual Operation"
Changes to settings may only be carried out for test
purposes in agreement with the technical service
department.
Settings in manual mode have the highest priority, they
have priority over the other functions of the associated
control elements of the DCU system.
Function
Entry of current time, in
"hours:minutes:seconds"
format
Entry of current date, in
"year-month-day"
format"
Entry of power failure
time for the system
behaviour when it is
switched on again
Configuration of the
Ethernet interface for
the connection of
external DP facilities,
e.g. via the LAN into the
laboratory
Switch-on or switch-off
of the acoustic alarm
signal, affects all alarms
41