Cleaning The Tank; Checking The Water-Level Sensor - Tylo Steam Pro Instructions D'installation Et D'utilisation

Tank inspections should be carried out based on the EASY TEST results (the inspection interval depends on the quality of the
water in the area). Poor quality = shorter interval between inspections. To provide a reminder of this, enter the inspection date
prescribed by EASY TEST or the number of hours between inspections under Service/Inspection. Inspections must be made
within the intervals indicated by the result of the EASY TEST.

6.2 Cleaning the tank

If inspection of the tank reveals abnormal amounts of limescale/other deposits on the tubular heating elements or the walls of
the tank, these deposits must be removed by mechanical means.

6.3 Checking the water-level sensor

Each time the tank is inspected, the water-level sensors should also be checked. Slacken level indicator nut.
If they are covered with thick deposits, clean them mechanically.
21