Offset Adjustment; Span Adjustment - Burkert 8045 Mode D'emploi

TEST MENU

4.5.1 OFFSET ADJUSTMENT

Within this option the user has the possibility of correcting the basic setting of 4 mA
generated by the transmitter. The transmitter generates a value of 4mA by pressing
when"OFFSET" is displayed within the main test menu.
ENTER
Measure the generated current with an ammeter. If the displayed value is incorrect it
can be corrected by entering the measured value on the ammeter.
Adjustment range: + / - 0.5mA
Enter the measured value
The corrected value of 4mA is calculated when is pressed when at the 'END'
ENTER
position within the test menu.

4.5.2 SPAN ADJUSTMENT

Span compensation provides the option of changing the basic setting of 20 mA. The
procedure is identical to that of the offset compensation above. The transmitter
key is pressed when "SPAN " is displayed within the
generates 20mA if the
ENTER
main test menu.
Measure the generated current with an ammeter. If the displayed value is incorrect it
can be corrected by entering the measured value on the ammeter.
Adjustment range: + / - 0.5mA
Enter the measured value
CALIB 0
The corrected value of 20mA is calculated when is pressed when at the 'END'
ENTER
position within the test menu.
31
8045
Fluid Control Systems