11.2.2. Installation - Burkert 8791 Manuel D'utilisation

Masquer les pouces Voir aussi pour 8791:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Type 8791
Attachment and assembly
11.2.2. installation
Warning!
risk of injury from improper installation!
Installation may be carried out by authorised technicians only and with the appropriate tools!
risk of injury from unintentional activation of the system and an uncontrolled restart!
Secure system from unintentional activation.
Following assembly, ensure a controlled restart.
yoke mount procedure:
Using
the clamping pieces
Fig. 13:
Attaching the hoop
Select short or long lever according to the stroke of the actuator.
(see Table 19: Attachment kit for linear actuators" part no. 6a/6b).
Assemble lever (if not pre-assembled) (
, hexagon bolts
and circlips
2
16
17
3
Fig. 14: ).
attach the hoop to the actuator spindle.
english
39

Publicité

Table des Matières
loading

Table des Matières