Additional Functions - Burkert 8791 Manuel D'utilisation

10.2. additional functions
The following additional functions can be configured and parameterized via the communications software:
function
DIR.ACTUATOR
SPLITRANGE
X.LIMIT
X.TIME
X.CONTROL
SAFE POSITION
SIGNAL ERROR
BINARY INPUT
OUTPUT
Table 18: Overview of additional functions
The instructions for the communications software describe in detail the individual menu options, as well as
parameterization and configuration.
These instructions can be found on the internet at
are also available on CD which can be ordered by quoting identification number 804625.
36
description
Assignment of the aeration state of the actuator chamber to the actual position.
Signal split range; input signal as % for which the valve runs through the entire
stroke range.
Limit of the mechanical stroke range.
Limiting the control speed.
Parameterization of the position controller.
Input the safety position.
Configuration of signal level, fault detection.
Activation of the binary input.
Configuration of the outputs (only with auxiliary board for analogue feedback signal).
english
Type 8791
Functions
www.burkert.com Documentation Type 8791 and