Accessories; Communications Software; Pactware 3.6; Serial Interface Rs 232 - Burkert 8791 Manuel D'utilisation

17.

accessOries

CauTion!
risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable replacement parts may cause injuries and damage the device and the sur-
rounding area.
• Use only original accessories and original replacement parts from Bürkert.
designation
M12 connection cable, 8-pole
RS232 adapter with interface driver for connection to a PC in conjunction
with an extension cable
Communications software based on FDT/DTM technology
Table 32: Accessories
17.1. communications software (pc software based on
fdT/dTM technology
The communications software consists of the Bürkert DTM unit (configuration and parameterization software) and
an associated frame application, e.g. PACTware 3.6.
The DTMs can only run in conjunction with an FDT frame application such as PACTware.
The PC operating program is designed for communication with the units from the Bürkert positioner family (basic
models without display).
17.1.1. pacTware 3.6
The software belongs to the framework program of the PACTware Consortium e. V. for support and operation of
the FDT 1.2 or FDT 1.2.1 capable DTMs from any manufacturer.
Microsoft .net framework 1.1 + .net framework 1.1 sp1 must be installed.
17.2. serial interface rs 232
The PC requires an RS 232 serial interface for communication with the positioner as well as an additional adapter
with interface driver (see Table 32: Accessories).
The RS 232 data transfer must be according to HART specification. The HART communications DTM installed
during the installation of PACTware can be used for this.
A detailed description and precise schedule of the procedure for the installation and operation of the
software can be found in the associated documentation.
60
english
Type 8791
Accessories
Order no.
919061
659457
Information at www.burkert.com