Mounting The Foot Pedal - MINN KOTA FORTREX Manuel Du Propriétaire

5
k. Once in the correct position, tighten the Jam Nut
upwards against the Stabilizer Bracket. This will
prevent the Aluminum Rod from turning.
l. Install the Top Bumper if there are threads exposed
on the Aluminum Rod above the Stabilizer Bracket.

Mounting the Foot Pedal

We recommend securing the Foot Pedal to the boat deck to
prevent it from being damaged during transport and to make
motor operation more efficient. It is recommended to use the
Mounting Holes on the Foot Pedal for a secure mount. The Foot
Pedal has three Mounting Holes. One Mounting Hole is located
under the Heel End of the Foot Pedal. The other two are located
under the Toe End of the Foot Pedal. We recommend using a
1/8" or 3/16" diameter screw and only tighten enough to slightly
compress the Bumper Pads underneath the Foot Pedal.
©2021 Johnson Outdoors Marine Electronics, Inc.
MOUNTING THE FOOT PEDAL
Heel End Heel End
Mounting Mounting
Hole Hole
Top Bumper Top Bumper
Stabilizer Stabilizer
Bracket Bracket
Jam Nut Jam Nut
Aluminum Rod Aluminum Rod
Toe End Toe End
Mounting Mounting
Holes Holes
Bumper Pad Bumper Pad
minnkotamotors.com | 17