Foot Pedal Adjustments; Adjusting The Steering Cable - MINN KOTA FORTREX Manuel Du Propriétaire

ADJUSTING THE STEERING CABLE

Route the Foot Pedal Cable neatly to minimize tripping hazards.
Practice proper ergonomics when operating the Foot Pedal to avoid fatigue and prevent injury.

FOOT PEDAL ADJUSTMENTS

Adjusting the Steering Cable
The steering cable tension is pre-set at the factory but, through normal use, may need occasional adjustment.
1
a. Adjust the tension of the cables by turning the cable
tension adjustment screw (Phillips pan-head screw)
located near the bottom of the foot pedal, just under
the steering cable cover.
b. Turn the screw clockwise to increase tension and
counter-clockwise to decrease tension.
CAUTION
If the cable becomes too loose, it may disengage the wrap
drum in the control box or the pulley in the foot pedal.
32 | minnkotamotors.com
CAUTION
Cable Tension Adjustment Screw
Stainless Steel Cable
Cable Pulley
©2021 Johnson Outdoors Marine Electronics, Inc.