UNIVERSAL SONAR
2
NOTICE:
The Universal Sonar Cable may not be
long enough to reach the fish finder. If the cable
length does not reach the desired fish finder
installation location, a 14.5' extension cable is
available to purchase. Minn Kota recommends
using the MKR-US2-11.
c.
Take the Universal Sonar Extension Cable, if needed,
and attach it to the Universal Sonar Cable exiting the
Foot Pedal. Firmly push the plug together and twist
the locking collar until it is snug.
d.
Install the Universal Sonar Cable that exits the Foot
Pedal or the Universal Sonar Extension Cable (if
used) to the appropriate Universal Sonar Adapter
Cable. Install the Adapter Cable to your fish finder.
Refer to your fish finder manual for complete
installation instructions.
NOTICE:
If any cables need to be routed, please
follow the guidelines in the Routing Connection
Cables section of these installation instructions.
20 | minnkotamotors.com
2d
Four Pin Connector
Four Pin Connector
Locking Collar
Locking Collar
Universal Sonar
Universal Sonar
Cable from
Cable from
Foot Pedal
Foot Pedal
NOTICE:
The connectors are keyed to prevent reversed
installation.
2e
Locking Collar
Locking Collar
Universal Sonar Cable from
Universal Sonar Cable from
Foot Pedal OR Universal
Foot Pedal OR Universal
Sonar Extension Cable
Sonar Extension Cable
Universal Sonar
Universal Sonar
Extension Cable
Extension Cable
Universal Sonar
Universal Sonar
Adapter Cable to
Adapter Cable to
fish finder
fish finder
©2021 Johnson Outdoors Marine Electronics, Inc.