Tecnodom Attila LISTRABT Notice D'utilisation page 35

MEASURING THE TEMPERATURE AT THE PRODUCT CORE
HEART
OF THE
PRODUCT
For a correct function of the Blast Chiller, it is necessary that the products contained inside are well
placed in the middle, in order to allow a good circulation of the air in the Blast Chiller.
ATTENTION
Children must be kept away from the Blast Chiller.
LOADING OF THE FOOD
The food to be chilled cannot be superimposed.
The thickness must be lower than:
• 50 mm for negative cycle.
• 80 mm for positive cycle.
SPACE BETWEEN THE PANS
In order to permit a good air circulation inside the Blast Chiller room:
• it is necessary to keep at least 7 cm space between the pans.
When the thickness of the products allows it, always use the core probe to know
exactly the reached temperature at the product core, and do not interrupt the cycle
before the temperature of +3°C and -18°C is reached.
For a correct function of the blast chiller, it is necessary that the products contained inside
are well placed in the middle, in order to allow a good circulation of the air in the blast chiller.
Do not obstruct the blast chiller/freezer air inlets inside the device.
Blast chillers | User and maintenance manual | EN
35