Change Zone Name - Smanos X300 Manuel D'utilisation

2. The control panel replies with SMS
After the control panel receives the SMS, the status LED flashes quickly. The control
panel replies SMS to your smart phone.
TEL:
1.
2.
3.
4.
5.
3. Forward and edit the SMS
After receiving the SMS, forward and edit it. Edit the alarm phone numbers and send
the SMS back.
TEL:
1. 6800001
2. 6800002
3. 6800003
4.
5.
33
4. The control panel replies with SMS
The control panel replies SMS to your smart phone with the content:Store phone
numbers successfully.
Store phone numbers successfully.
Note: If the input format or content is incorrect, the control panel replies: Wrong input!
After you store alarm phone numbers, the control panel accepts only the commands from
these numbers. If a number rather than the 5 alarm phone numbers sends SMS to operate
the control panel, it replies: Sorry, operation failed. Phone number is not authorized.
Once an alarm is triggered, the control panel will call these numbers for three rounds at
most. As long as one user answers the call and operates the system, the control panel stops
dialing the next number.

Change zone name

You can change the name of the first 9 zones, facilitating zone identification. Send
to change the name of the first zone; send "42" to change the name of the second
zone, and so on. You can change only the first 9 zones. Remote controls do not
involve zones.
1. Send "41"-"49"
Send the SMS "41"-"49" to the phone number of the control panel.
2. The control panel replies with SMS
After the control panel receives the SMS, the status LED flashes quickly. The control
panel replies SMS to your smart phone.
Zone 1 Name:
Zone 1 Alarm
"41"
41
EN
34