Package List - Smanos X300 Manuel D'utilisation

Package List

Please check whether the package contains the following items. If not, please contact
the retailer.
X300 Control Panel x 1
X300 control panel is the "heart and
brain" of the whole system, which is for
receiving and processing the signals
from wireless detectors and remote
controls. In case of emergency, the panel
hoots on site to deter intruders, sent
SMS notification and dials the pre-stored
alarm phone numbers. After user pick
up the phone, system play first the pre-
recorded voice message, then user can
carry out operations such as arm,
disarm, monitor, etc.
MD2300 PIR Motion Detector x 1
The detector adopts digital dual-core fuzzy logic control
processing technology and intelligent analysis
algorithm, effective resolution of interfering signal and
human movement signal, preventing false alarm. It can
detect the temperature and movement of human
bodies within the 8-meter cone space. When detecting
human movement twice in 3 minutes, it switches to the
power-saving mode automatically. After 3 minutes of no
human movement, it switches to the working state.
DS2300 Door/Window Contact x 1
The contact can be used for doors, windows, or other
devices that can be opened or closed. Once a window
or door is opened (the transmitter and magnet are
separated), the control panel will trigger an alarm.
03
RE2300 Remote Control x 2
It's convenient to carry. With the
remote control, you can
arm/disarm the system, set home
mode, perform mute arm/disarm,
make an emergency call.
Screw for control Bracket for PIR
panel x 1 detector x 1
User manual x 1 Screw kit x 1
(For PIR sensor)
AC adapter x 1
It provides power supply to the control
panel and built-in battery. When the
power is off, the built-in 18650 lithium
3.7V 1200mAh lithium battery will
sustain 15 hours standby.
Double-sided tape x 4
(2pcs for door/window contact
2pcs for PIR sensor)
Warranty card x 1
04
EN