Select System Language; Store Alarm Phone Numbers - Smanos X300 Manuel D'utilisation

Select system language

This is to select the system language.
1. Tap [Language]
Access the main interface. Tap the added account. The main interface appears. The
interface for selecting language appears.
2. Send SMS
Select the desired language. Then tap
sending SMS. Tap [Send] to send the SMS to the phone number of the control panel.
X300
0001
47
[DONE] . The interface is redirected to that for
3. The control panel replies with SMS
After the control panel receives the SMS, the status LED flashes quickly. The control
panel replies SMS to your smart phone with the content: Operate successfully.
Operate successfully.
Note: Some languages may not be available for some areas.

Store alarm phone numbers

You can store 5 alarm phone numbers. When an alarm is triggered, the control panel
will send SMS to the stored alarm phone numbers in turn, and then call these
numbers in turn. After the control panel receives an alarm signal, it takes about 15
seconds to send the first SMS. (The time may differ from network signal strength.)
1. Tap [Store Phone Numbers]
Access the main interface. Tap the added account. The main interface appears. The
interface for storing phone numbers appears.
EN
48