Table des Matières
Publicité
Connect the PIR motion detector
This is to connect the PIR motion detector to the control panel.
1. Press the connect button on the control panel
Press the
[Connect
]
button at
the bottom of the control panel
with a sharp object. It beeps once
and the status LED is on.
2. Press the test button on the PIR
motion detector
Press the test button at the back of
the PIR motion detector twice. The
control panel beeps once, indicating
successful connection.
Note:
If the control panel beeps twice, it indicates the detector has been connected before.
Connect a wireless siren (Optional)
This is to connect a wireless siren to the control panel.
1. Make the siren in connect state (Take SS1005 for example)
Press the connect button in wireless
siren, the siren beeps once. 3 seconds
later, the siren beeps again. The LED
flashes every 1 second, which means
the siren is in connect state.
27
2. Press the [SOS] button on the control panel
The siren beeps once, indicating successful
connection.
Note:
the siren and the panel has been connected
before. To connect other wireless siren,
OFF-ON
please refer to the related manuals.
POWER
12V/0.5A
Connect other accessories (optional)
For how to connect other accessories to the control panel, please refer to related user
manuals or operations on the PIR motion detector and door/window contact.
Delete accessories
Deleting accessories is to disconnect accessories from the control panel. After that, the
control panel cannot receive signals from accessories.
Press the
bottom of the control panel for more
than 5 seconds with a sharp object. The
control panel beeps once, indicating all
accessories are deleted.
Delete wireless siren
Delete the connection between wireless siren and control panel.
Press and hold the connect button of the wireless siren until one beep is heard, which
means the deletion is succeeded.
If the siren beeps twice, it indicated
[Connect
]
button at the
EN
SOS
OFF-ON
POWER
12V/0.5A
28
Publicité
Chapitres
Table des Matières
