Function Setting; Arm & Disarm By Free Phone Call; Disarm; Arm - Smanos X300 Manuel D'utilisation

Function Setting

You can set the system by phone call, SMS, App, operations on the control panel, thus
putting your home under protection.
Insert the SIM card only after the control panel is switched off (from ON to OFF). Then,
switch on the control panel (from OFF to ON) so as to search signals. A GSM SIM card
with normal functions (calling, answering, SMS and caller display) is required.
Arm & Disarm by Free Phone Call
You can make a call to arm or disarm the system remotely for free.

Disarm

You can make a call to disarm the system.
Call the phone number of the control panel. Hold on until the control panel hangs up
the call. The control panel will not call back. The system is disarmed.

Arm

You can make a call to arm the system.
Call the phone number of the control panel. Hang up when hearing the ring tone. The
control panel will call back. Hang up the phone directly. The system is armed.
Note: In the initial state, any number can call to arm or disarm the system. After alarm phone
numbers are stored, only these numbers can call to disarm or arm the system. Other
numbers will be blocked out automatically by the control panel for security. The system is
disarmed by default.
29

SMS Operation

You can operate the system by sending SMS. SMS is charged according to telecom
operator.

Query for menu

This is to query for the menu.
1. Send "?"
Send the SMS "?" to the phone number of the control panel.
2. The system replies with a menu
After the control panel receives the SMS, the status LED flashes quickly. The control
panel replies with the following menu.
'0'Disarm
'1'Arm
'2'Call-back monitor
'3'Store phone number
'41-49'Change zone name
'5'Entry and exit delay
'6'Set siren volume and ringing time
?
30
EN