Arm; Monitor - Smanos X300 Manuel D'utilisation

Arm

This is to arm the system.
1. Tap the arm icon
Access the main interface. Tap the added account. The main interface appears. Tap the
[Arm ] and then [OK] . The interface is redirected to that for sending SMS. Tap
to send the SMS to the phone number of the control panel.
2. The control panel replies with SMS
After the control panel receives the SMS, the status LED flashes quickly and the mode
LED is on. The control panel replies SMS to your smart phone with the content:
System armed.
System armed.
45
[Send]
X300
1

Monitor

This is to monitor the site remotely by call-back from the control panel.
1. Tap the call icon
Access the main interface. Tap the added account. The main interface appears. Tap the
[ ] and then [OK] . The interface is redirected to that for sending SMS. Tap
send the SMS to the phone number of the control panel.
2. Monitor the site
After the control panel receives the SMS, the status LED flashes quickly. The control
panel calls your phone number. Then, you can answer the call and monitor (listen in)
the site.
For iPhone with smaller screen, you need to tap
[Send] to
X300
2
[
▼ ] to show the next interface.
46
EN