Change User Code - Smanos WK7000 Mode D'emploi

EN
Disable Direct Disarm by RFID Tag
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for 10
seconds, the setup is successful.
Enable Direct Disarm by RFID Tag
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for 10
seconds, the setup is successful.
Note: Default setting: 0, disable the function of direct disarm by RFID tag.
17
*7 * 0*
*7 * 0*
*7 * 1*
*7 * 1*
*8*neuer Benutzer-Code*
*8*neuer Benutzer-Code*

Change User Code

*9*neuer Admin-Code*
Using user code can wake up keypad, open electronic door lock, or
send Arm, Disarm, Stay Mode commands to the control panel.
To avoid passcode reveal, please change user code when first time
use.
*9*neuer Admin-Code*
Change User Code
Enter setup state, input:
*8*new admin code*
*0 * *
*0 * *
When one beep is heard and the LED indicator keeps on for 10
*9*new admin code*
seconds, the setup is successful.
Note: User code is 4 digits; default code is "1234".
EN
18