Installation With Internal Cable Passage With Product Inverted - Videotec ULISSE EVO UE Manuel D'instructions

6.1.3 Installation with internal cable passage with product inverted

CAUTION! Always secure the product with the safety chain (6.7 Fastening of the safety coupling,
page 22).
This installation mode allows cable passage inside the mounting brackets.
In the event of installation of the product inverted, the sunshield must be assembled as illustrated in the
relevant chapter (6.6 Sunshield mounting, page 22) and enable the Ceiling Mount mode using the web
interface.
Fig. 6
16
B
A
C
D
E
F
MNVCEVO_2203_EN