Starting A Cold Engine - Yamaha YZ250F 2004 Manuel D'atelier Du Proprietaire

Masquer les pouces Voir aussi pour YZ250F 2004:
Table des Matières

Publicité

STARTING AND BREAK-IN
STARTING AND BREAK-IN
WARNING
Never start or run the engine in a closed
area. The exhaust fumes are poisonous;
they can cause loss of consciousness and
death in a very short time. Always operate
the machine in a well-ventilated area.
CAUTION:
The carburetor on this machine has a
G
built-in
when starting the engine, do not operate
the throttle or the spark plug will foul.
Unlike a two-stroke engine, this engine
G
cannot be kick started when the throttle is
open because the kick starter may kick
back. Also, if the throttle is open the air/
fuel mixture may be too lean for the
engine to start.
Before starting the machine, perform the
G
checks in the pre-operation check list.

STARTING A COLD ENGINE

1. Inspect the coolant level.
2. Turn the fuel cock to "ON".
3. Shift the transmission into neutral.
4. Fully open the cold starter knob 1 .
5. Kick the kickstarter crank.
WARNING
Do not open the throttle while kicking the
kickstarter crank. Otherwise, the kick-
starter may kick back.
1 - 14
GEN
INFO
accelerator
pump.
Therefore,

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Yz250f/lc 2000Yz250fn/lc 2000Wr250f 2001Wr250fn 2001

Table des Matières