Electrical Connection; Build In Hl62..E - Atag HL62 E Serie Mode D'emploi

INSTALLATION GUIDE

Electrical connection

For the connection, use an approved cable, in accordance with the
regulations. The cable casing should be of rubber.
There is a label on the underside of the appliance with the wiring
diagrams. The connection terminals are accessible once you have opened
the junction box on the underneath. The junction box cover can be
opened with a screwdriver.
If you want to make a fixed connection, make sure that a multi-polar
switch with a contact separation of at least 3 mm is fitted in the supply
line.
Power setting table
Type of hob
Cooklight
Electrical connection
230 V - 50 Hz
Power of element
Front left
Rear left
Rear right
Front right

build in HL62..E

HL62..E
x
x
2200 W / 750 W
1200 W
1800 W
1200 W
75