Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
The fitting of the appliance should only be carried out by a registered
Corgi gas fitter.
please note
The type of gas and the country for which the appliance has been
designed are indicated on the ratings plate.
This is a category 3 appliance.
Gas connection
The gas connection must comply with national and local regulations.
We recommend that the hob be connected by means of a fixed pipe.
Connection using a specially designed safety hose is also permitted.
Behind an oven use must be made of a pipe made entirely out of metal.
please note
A safety hose may not be bent and must not come into contact with
moving parts of kitchen units.
In all cases the connection tap for the appliance must be positioned such
that it is easily accessible.
Before using the appliance for the first time check the connections using
water and washing-up liquid to ensure that there are no gas leaks.
174
gas connection
INSTALLATION
General
For the connection, use an approved cable, in accordance with the
regulations. The cable must bear one of the following indications:
H05V2V2-F, H05RR-F of H05RN-F.
There is a label on the underside of the appliance with the wiring
diagrams. The connection terminals are accessible once you have opened
the junction box on the underneath. The junction box cover can be
opened with a screwdriver.
The wall socket and plug must be accessible at all times.
If you want to make a fixed connection, make sure that a multi-polar
switch with a contact separation of at least 3 mm is fitted in the supply
line. The switch must be accessible at all times.
Component voltage
230V 50Hz
Capacities induction modules
2800 W
Left
2800 W
Right
Power ignition transformer
0,6 W
1
electrical connection
right zones
ignition transformer
+ left zones
2
3
4
5
175
Publicité
Chapitres
