Technical Specifications; Important Safety Instructions - Storch HVLP SmartFinish 360 Mode D'emploi

Technical Specifications

Power supply
Power rating
Fuse
Maximum extension cable length
Number of turbines
Maximum air flow capacity
Turbine weight
Maximum working pressure
Maximum hose length
Sound pressure level
Sound power
Product contact materials
Notes
*Noise pressure level at distance of one metre from device. Noise level measured as per ISO-3744.
All information is without guarantee! Subject to technical modifications and errors!
For professional use only. For portable spray applications
of fine finish coatings. Not approved for use in explosive
atmospheres or hazardous locations

Important Safety Instructions

Read all warnings and instructions in this manual and in
related manuals.
Be familiar with the controls and the proper usage of the
equipment. Save these instructions.
WARNING
FIRE AND EXPLOSION HAZARD
The turbine motor generates sparks. Keep sprayer at least
6 m from spray area. Use additional hose if necessary.
Warnings
The following warnings are for the setup, use, groun-
ding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning
and the hazard symbols refer to procedure-specific risks.
When these symbols appear in the body of this manual
230 V / 50 Hz
1,400 W
15 m. 2.5 mm
3,950 l/min
10.9 kg
0.6 bar
83.0 dBa
95.9 dBa
Zinc- and nickel-plated carbon steel, nylon, stainless steel,
PTFE, acetal, leather, UHMWPE, aluminium, carbide,
polyethylene, fluoroelastomer, urethane
The applicable local regulations must be complied with
when working with flammable or combustible materials in
a plant or at a fixed location.
or on warning labels, refer back to these Warnings. Pro-
duct-specific hazard symbols and warnings not covered
in this section may appear throughout the body of this
manual where applicable.
83
6 A
2
4
18 m
Original instruction