1. General information
1.1 Identification
This document is the operating manual for the Multisprayer MS 10 by STORCH. The manual describes the function of
the Multisprayer and provides the most important information for safe handling and use. All specifications refer to the
current technical development status of the device and only retain their validity if no changes have been made to the
device.
1.2 Important notes on the operating manual
1.2.1 Keeping the operating manual
The manual must be available at all times during the life cycle of the device.
1.2.2 Applicable documents
Declaration of conformity
2. Product description
2.1 Product data
2.1.1 Technical data
Mains voltage:
Output:
Protection class:
rpm:
Pump capacity:
Operating pressure:
Back pressure:
Hose length:
Delivery head:
Intake:
Material temperature:
Pump type:
Weight:
No responsibility is accepted for the accuracy of this information. Subject to technical modifications and errors!
2.1.2 Operating materials
Hydraulic oil Unysin CLP 150
2.2 Scope of delivery
MS 10 Multisprayer, 1.5 m suction and return hose, 10 m material hose with connection fitting and quick coupling,
spray gun with pressure regulation and quick coupling, 450 mm spray lance, universal nozzle, operating manual.
230 V, 50 Hz
440 W
IP 55
1400 rpm
0.5 - 10 l/min max.
0.5 - 10 bar, continuously variable
10 bar max.
50 m per connection max. (depending on the material viscosity)
50 m max.
Scope of delivery 1.5 m, max. 7.5 m
60 °C max.
Dual diaphragm pump, acid resistant
14 kg
59
Translation of the original instruction