Suction Hose; Intake Hose - Storch PowerCoat FF Mode D'emploi

Suction hose

The spray gun is supplied with a flexible suction hose
which can be adjusted in terms of the angle of inclination.
Spraying ceilings, walls, cornices, etc.
When spraying ceilings or walls, and align the suction
hose assembly with the front side of the material contai-
ner.
Note:
If the spray gun is held at too great an angle or tilted, the
suction pipe loses contact the material and the spray gun
stops spraying.
Spraying floors, skirting boards, etc.
When spraying floors align the suction hose assembly
with the rear side of the material container.
131 Original instruction