Music Search - Mercedes-Benz LINGUATRONIC Notice D'utilisation Complémentaire

Music search

32
Commands
"Help CD"/"Help DVD"/"Help MP3"
You can use the following commands to have
all the commands for the CD, DVD, or MP3
player read out:
"Help CD"
R
"Help video DVD"
R
"Help MP3"
R
"Next CD"/"Next DVD"
The commands "Next CD"/"Next DVD" are
used to select the next CD/DVD from your
DVD changer.
"Track 1" to "Track 999"
Use the commands "Track 1" to "Track 99" to
select a track number from the active
medium.
"Next track"
You can use the "Next track" command to
select the next track.
"Previous track"/"Repeat track"
Use the commands "Previous track"/"Repeat
track" to repeat the track just played. If the
command is spoken as the first few seconds
of the track are played, the previous track is
selected.
"Next folder"/"Previous folder"
Use the commands "Next folder"/"Previous
folder" to select a folder on the active medium
in MP3 mode.
"Memory card"
Using the command "Memory card", you can
change to the SD memory card on COMAND.
6 Only if Media Interface is not installed
"Video DVD"
With the command "Video DVD", you can
start a video DVD on COMAND.
"Hard drive"/"MEDIA REGISTER"
With the commands "Hard drive"/"MEDIA
REGISTER", you can switch to the internal
hard drive (MEDIA REGISTER) of COMAND.
"Media Interface"
You can use the command "Media Interface"
to switch to an external device that is
connected to the Media Interface.
"USB"
With the "USB" command
the USB storage device on COMAND. There
are two USB ports available.
Music search
Operation
You can use the music search to find music
tracks from all available media.
You can also find music tracks which are
available via the Media Interface, the USB and
the SD card.
i
In order to enable a music search in the
available internal media, the media player
(e.g. CD player) must be switched on.
In order to enable a music search via the
Media Interface, the external media player
®
(e.g. iPod ) must be switched on.
In addition, the available music data must
have already been searched for by the
system. This triggers additional data
processing for the Voice Control System.
This can take some time, depending on the
amount of data.
6
, you can switch to