Digital Cooking Programmer - Franke CR 86 M Série Manuel D'installation Et Mode D'emploi

EN
CL 85 M / CM 85 M / CR 86 M _/F / SM 86 M _/F / SMP 86 M_/F

Digital cooking programmer

(Fig. 1c, 1d, 1e)
It enables oven programming in the following
modes:
– delayed start of cooking with set duration,
– immediate start of cooking with set duration;
– timer.
Setting the digital clock
When the appliance has been connected
to the mains or after a power failure the display
will flash on: „0.00".
X X
Press the + and - buttons together for a few
seconds. The time of day can be adjusted
with the + and - buttons, while the dot
between the hours and minutes flashes.
„ „
If the time setting mode is selected
when an automatic programme
is active, the automatic programme
is cancelled.
Possible time adjustments can be made
by repeating the steps described above.
Acoustic signal frequency modification
The frequency of the acoustic signal
can be changed if a cooking cycle
is not programmed (therefore the display
shows the time of day).
X X
Press the + and - buttons (from the time
modification menu) together.
X X
Press Mode or Set to select the menu for
modifying the acoustic signal frequency.
X X
The acoustic signal frequency can be
modified by repeatedly pressing the Mode
or Set button; „ton1", „ton2", „ton3" will
appear on the display.
Manual oven operation
Once the time has been set, the programmer
automatically switches to manual mode.
Starting delayed cooking with set duration
X X
When the time of the day is displayed,
press the Mode or Set button twice
to set a duration.
X X
Then press it again to set the end
of cooking time.
X X
Set the required time with the + and -
buttons.
„ „
During duration or end time
adjustment mode selection, the Auto
symbol remains lit.
„ „
Once a programme duration is set,
the end time cannot be decreased.
„ „
Likewise, the duration of a programme
cannot be prolonged once
the end time is set.
„ „
The end time and duration settings
define programme start time as follows:
start time = end time - duration.
„ „
After setting the duration and end time,
the display still shows the end time.
„ „
The programme starts when the time
of day coincides with the start time:
the Auto symbol lights up steadily and
the symbol
„ „
After the start of cooking, the
display shows the countdown. If only
the end of cooking time is selected
(the duration is = 0), cooking starts
and the display shows the countdown.
„ „ The Auto symbol remains lit
during the wait for delayed start
and for the entire duration of cooking.
„ „
The symbol
for delayed start and remains fixed
when cooking starts.
„ „
An acoustic signal sounds
at the end of cooking; to silence
it, press Set or allow the signal
to continue for its duration.
Semiautomatic programme with
duration or end time
Programme time setting
X X
To select the programme duration or end
time press the Mode or Set button twice
and set the required time with the + and –
buttons.
– 12 –
starts flashing.
flashes during the wait