Spare Parts And Accessories; Disposal; Disposing Of Chainsaw And Battery; Ec Declaration Of Conformity - Stihl MSA 160 T Notice D'emploi

English

21 Spare Parts and Accessories

21.1 Spare Parts and Accessories
These symbols identify original STIHL
replacement parts and original STIHL
accessories.
STIHL recommends the use of original STIHL replacement
parts and accessories.
Original STIHL replacement parts and original STIHL
accessories are available from STIHL servicing dealers.

22 Disposal

22.1 Disposing of Chainsaw and Battery

Information on disposal is available from STIHL servicing
dealers.
► Dispose of the saw, guide bar, saw chain, battery,
accessories and packaging in accordance with local
regulations and environmental requirements.

23 EC Declaration of Conformity

23.1 STIHL MSA 160 T Chainsaw

ANDREAS STIHL AG & Co. KG
Badstrasse 115
D-71336 Waiblingen
Germany
declare in exclusive responsibility that
– Category: Cordless chainsaw
– Make: STIHL
– Model: MSA 160 T:
– Serial identification: 1252
66
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and
has been developed and manufactured in compliance with
the following standards in the versions valid on the date of
production: EN 55014 - 1, EN 55014 - 2, EN 60745 - 1 and EN
11681 - 2 (where applicable).
The EC type examination in accordance with Directive
2006/42/EC Article 12.3(b) was carried out at VDE Prüf- u.
Zertifizierungsinstitut (NB 0366), Merianstraße 28,
63069 Offenbach, Germany
– Certification number 40037960
The measured and guaranteed sound power levels were
determined according to Directive 2000/14/EC, Annex V.
– Measured sound power level: 93 dB(A)
– Guaranteed sound power level: 95 dB(A)
Technical documents are deposited at ANDREAS STIHL AG
& Co. KG Produktzulassung (Product Licensing).
The year of manufacture, country of manufacture and serial
number are applied to the chainsaw.
Done at Waiblingen, 01.03.2017
ANDREAS STIHL AG & Co. KG
Thomas Elsner, Director Product Management and Services

24 General Power Tool Safety Warnings

24.1 Introduction

This chapter reproduces the pre-formulated, general safety
precautions specified in the IEC 62841 standard for hand-
held motor-operated electric tools.
STIHL is obliged to publish these texts.
21 Spare Parts and Accessories
0458-706-9921-A