Disengaging The Chain Brake; Removing And Fitting The Battery; Fitting The Battery; Removing The Battery - Stihl MSA 160 T Notice D'emploi

English
► Push the hand guard away from the front handle with your
left hand.
The hand guard engages with an audible click. The chain
brake is engaged.
7.2

Disengaging the Chain Brake

► Pull the hand guard toward the front handle with your left
hand.
The hand guard engages with an audible click. The chain
brake is disengaged.

8 Removing and Fitting the Battery

8.1

Fitting the Battery

► Engage the chain brake.
54
1
2
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages in position with a click.
8.2

Removing the Battery

► Stand the saw on a level surface.
1
2
► Depress both locking levers (1).
The battery (2) is unlocked and can be removed.

9 Switching the Saw On/Off

9.1

Switching On

► Hold the saw with your right hand on the control handle –
wrap your thumb around the control handle.
► Disengage the chain brake.
8 Removing and Fitting the Battery
1
0458-706-9921-A