Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB Safety instructions

1. Safety instructions

Warning!
• This drive must only be connected by authorised specialists. For installation and
maintenance the system has to be de-ernergised.
• Consider the following:
• Relevant laws, standards and instructions
• Country-specific terms
• The specifications of the local energy providers and stipulations for damp rooms
pursuant to VDE 0100
• The safety instructions of DIN EN 60335
• The state of the technology at the time of installation
• This instruction manual and any operating instructions for connected com ponents
• For the drive installation, a mains supply circuit break with at least 3 mm contact
opening width per pole must be provided (DIN EN 60335). Safety measures against
inadvertent activation must be in place.
• Check the drive and the complete installation for damage. In case of damage to the
drive, in particular to the connection line, it must not be taken into operation!
• Keep children and non-authorized persons away from the installation. Also keep
objects from the operating area. It must be possible to see the operation area during
working process.
• Control units must be installed at a height of more than 1.50 m. Movable parts of the
drive must be installed at a height of more than 2.50 m above the ground or another
surface that grants access to the drive. The minimum distance between moving parts
and adjacent objects is 40 cm.
• Outdoor or flush mounted, the motor connecting cable must be laid in a conduit.
• Nominal torque and duration of activation must be aligned with the system require-
ments. Technical data such as nominal torque and duration of activation are written
on the identification plate.
• This instruction manual is part of the device and warranty conditions. It has to be
handed out to the electrician and operator.
• Damage due to wrong handling, wrong wiring, use of force, interference with the drive
by a third party or subsequent changes to the installation and any consequential
damage arising from this is not subject to the warranty.
• Use only unchanged SELVE original parts and accessories.
24

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sel plus-rSem plus-rSes-r

Table des Matières