Technical Data; Device Description - Güde GWS 400 HM-2 Traduction Du Mode D'emploi D'origine

Technical Data

Log Cutting Saw
Art. No
Rated voltage / Frequency
Rated power
Current strength, A
Motor power
Saw blade dia. x hole dia
Saw blade thickness
Saw blade
Saw blade brake
Dimensions L x W x H
Enlargement Log Cutting Saw
Workpiece diameter
Workpiece length
Protection type (IP)
Weight
Noise details
Sound pressure level L
pA
Measured sound power level L
Guaranteed sound power level L
* The S6-40% indicates a load profile of 4 min load and 6 min idle time
1) Measured according to EN ISO 3746: 2010, loaded, hazardousness K=4 dB (A)
The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Although there is a correlation between emission levels and environmental impact levels, whether
further precautions are necessary cannot be derived from this. Factors in uencing the actually present environ-
mental impact level in the workplace include the characteristics of the work area and other noise sources, i.e. the
number of machines and other neighbouring work processes. The permitted workplace values can likewise vary
from country to country. This information is intended to assist the user in estimating hazards and risks.

Device description

1 Saw blade protection
2 Feed cradle
3 Emergency stop
4 Tension spring
3
4
1)
WA
1)
WA
1
2
GWS 400 HM-2
01871
230 V / 50 Hz
1,8 kW , S6-40%*
8 A
2820 min
400 mm x 30 mm
3,0 mm
HM 40 T
Mechanical Brake
800 x 860 x 990 mm
350 mm
min. 50 mm
max. 120 mm
min. 500 mm
max. 1300 mm
IP 54
43 kg
102 db (A)
111 dB(A)
115 dB(A)
Read and understand the
operating instructions before
using the appliance. Familiarise with
the control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks
to third parties. Abide by all the safety measures
stated in the service manual. Act responsibly toward
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education. In case of any
doubts about connection and operation refer please
to our customer center
ENGLISH ENGLISH
-1
25