Table des Matières
Publicité
Technical Data
Circular saw
Art. No
Service connection
Rated input
No-load speed
Saw blade dia. x hole dia
Max. Cutting depth at 90°/45°
Weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to EN 60745; Uncertainty K = 3 dB (A); Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value a
2
Uncertainty K = 1,5 m/s
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The plungecut circular saw can be used for sawing
solid wood, bonded wood, glued veneer, materials
similar to wood, aluminium profiles, Non-ferrous
metals and plastics.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
h
TS 57-1200 SET
58138
230V - 50Hz
1200 W
5200 min
165 x 20 mm
57 / 42 mm
4,6 kg
90,73 dB(A)
101,73 dB(A)
3,249 m/s2
In spite of compliance with all relevant design regula-
tions, dangers may still present themselves when the
machine is operated, e.g.:
• noise emissions
• dust emissions
• vibrations to hand and arms
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING / Caution!
Read the operating instructions to reduce
the risk of injury.
ENGLISH
TS 57-1400 KE SET
58232
230V - 50Hz
1400 W
-1
-1
2200 - 5200 min
165 x 20 mm
57 / 42 mm
4,6 kg
90,73 dB(A)
101,73 dB(A)
3,249 m/s2
17
Publicité
Table des Matières
