English; Maintenance | Guarantee; Technical Data; Specified Conditions Of Use - Güde GWS 700 ZR HM-2 Traduction Du Mode D'emploi D'origine

ENGLISH

Technical Data

20
Log Cutting Saw
Art. No
Connection
PTO speed
Idle speed
Sawblade x Borediameter
Sawblade Thickness
Loading max.
Workpiece diameter
Workpiece length
Weight
Noise details
Sound pressure level L
Measured sound power level L
Guaranteed sound power level L
1) Measured according to EN ISO 3746: 2010, loaded, hazardousness K=4 dB (A)
necessarily represent safe workplace values. Although
there is a correlation between emission and
immission levels, it cannot be reliably deduced
whether or not additional precautionary measures
are necessary. Factors influencing the current
immission level at the workplace include the nature
of the work area, other noise sources, etc., e.g. the
number of machines and other adjacent operations.
Permissible workplace values may also vary from
country to country. However, this information should
enable the user to make a better assessment of the
hazard and risk.
Read and understand the operating instructions befo-
re using the appliance. Familiarise with the control
elements and how to use the appliance properly.
Abide by all the safety measures stated in the service
manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
The operating personnel must be adequately trained
in the use, adjustment and operation of the device.

Specified Conditions Of Use

The circular saw for firewood is used for cross cutting
of firewood. It is necessary to follow all technical
specifications and safety instructions.
Pieces of wood that are too short, too light or too thin
pA
WA
WA
The values stated are emission
values and therefore do not
GWS 700 ZR HM-2
01729
PTO
540 min
-1
1420 min
-1
700 x 30 mm
4,2 mm
100 kg
80-240 mm
500-1500 mm
164 kg
102 dB (A)
111 dB(A)
115 dB(A)
to get caught by the barbs in the feed cradle must not
be processed by the machine.
The machine may only be used if it is fully assem-
bled.
Operation of a machine that is not fully assem-
bled is strictly prohibited.
The machine may only be operated by one
person.
Make sure there is nobody present in the dange-
rous area. The minimum distance is 2 m.
Residual risks
Risks!
Note: There may still be some residual risks when
operating the machine, even if all applicable design
regulations are followed.
Risk of injury to fingers and hands. Never put your
hands in the saw blade area.
Parts of workpieces and tools leave damaged tools:
Wear safety glasses
Noise emissions: Hearing protectors must be worn
Wood emissions: Wear respirator
Despite all the preventive measures taken, there may
still be hidden residual risks.
Residual risks can be minimized by following the safe-
ty instructions and using them in accordance with the
stipulated provisions and operating instructions.
Dust exposure is affected by the type of material
being processed. It is important to use local exhaust
(trapping near the source) and to properly adjust the
exhaust covers, guides and grabs.
Dust from work is often harmful and must not get