Operating; Safety Information - Burkert 3003 Mode D'emploi

A 18 V DC connection
B Battery block connection
C Connection for feedback
(charge state)
* Green LED lights up: Mains operation
Green LED flashes: Battery operation (max. 3 min)
** Red LED off: Battery charged
Red LED flashes: Battery is being charged (max. 14 h)
18
D Green LED*
E Red LED **
english
Type 3003

Operating

10. operaTinG
10.1. safety information
Danger!
hazard due to electrical voltage!
intervention in the device poses an acute risk of injury.
• Turn off the power before manually servicing the rotary actuator.
Warning!
hazard due to improper servicing!
Improper servicing can result in personal injury and in damage to
the device and its surroundings.
• The operating personnel must be aware of and fully understand
the operating instructions.
• Pay attention in particular to the safety information and the
intended use.
• The device may only be serviced by properly trained personnel.
hazardous situation due to manual intervention!
During manual intervention the process can change into an unde-
fined state which can lead to hazardous situations.
• Ensure a defined and controlled restarting of the process fol-
lowing manual intervention!