Burkert 3003 Mode D'emploi page 6

Warning!
dangerous situations can arise during installation and main-
tenance work!
• This work may only be carried out by authorised technicians using
appropriate tools!
• Ensure a defined or controlled restarting of the process after an
interruption in the electrical power supply!
Caution!
the general rules of technology apply to the planning and
operation of the device!
If you fail to observe these rules, injuries may result and/or the
equipment and even its surroundings may be damaged.
• Observe the general rules of technology!
The electrical rotary OPEN/CLOSED actuator Type 3003 was
developed with due consideration given to accepted safety
rules and is state-of-the-art. However, dangers can still arise.
Failure to observe this operating manual and its operating instructions
as well as unauthorized tampering with the device release us from
any liability and also invalidate the warranty covering the devices
and accessories!
6
english
Type 3003
General safety information
note!
electrostatically sensitive components / modules!
The device contains electronic components that react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects will endanger these components. In
the worst case, they will be immediately destroyed or will fail after
commissioning.
• Observe the requirements according to EN 61340-5-1 in order
to minimise or avoid the possibility of damage through sudden
electrostatic discharge.
• You should also ensure that the electronic components do not
come into contact with nearby operating voltage.