Circuit Board For Actuator With Standard Signal Input - Burkert 3003 Mode D'emploi

Cams
Wrench
Adjustment
direction
Fig. 5: Setting limit switches in counter clockwise and clockwise
directions
The rotary actuator is supplied with the following factory
settings:
• The CLOSED limit switches are activated with the cams 2
and 4 (closed position).
• The OPEN limit switches are preset at a 90° rotation
angle.
Type 3003
Installation
Setting in clockwise
direction or setting
in counter clockwise
direction
8.5. circuit board for actuator with
standard signal input
N
L
G
H
B
C
A
M
Fig. 6: Circuit board
A Electrical power supply
24 V AC/DC
B Connection terminals of
the input signal
C Connection terminals of
the feedback
english
D
E
F
J
K
I
H K2 plug-in jumper
I K3 plug-in jumper
J Green and red LED
13