Assembly; Parts Out Of Box; Hardware Kit - Tunturi Pure Cross R 6.1 Mode D'emploi

run the mains cable underneath a
carpet. Do not place any objects on
the mains cable.
• Make sure that the mains cable does
not hang over the edge of a table.
Make sure that the mains cable
cannot be caught accidentally or
tripped over.
• Do not leave the equipment
unattended when the mains plug is
inserted into the wall socket.
• Do not pull the mains cable to
remove the mains plug from the wall
socket.
• Remove the mains plug from the
wall socket when the equipment
is not in use, before assembly or
disassembly and before cleaning and
maintenance.

Assembly

Parts out of box

The package contains the parts as
shown in figure.
If a part is missing, contact your dealer.
Owner's manual • Pure 6.1

Hardware kit

The package contains the fasteners as
shown in figure.
If a part is missing, contact your dealer.
General assembly information
WARNING
• Assemble the equipment in the given
order.
• Carry and move the equipment with
at least two persons.
CAUTION
• Place the equipment on a firm, level
surface.
• Place the equipment on a protective
base to prevent damage to the floor
surface.
• Allow at least 100 cm of clearance
around the equipment.
Refer to the illustrations for the correct
assembly of the equipment.
GB
5