EC4M0000
ENGINE REMOVAL
34 Nm (3.4 m•kg, 24 ft•lb)
69 Nm (6.9 m•kg, 50 ft•lb)
26 Nm (2.6 m•kg, 19 ft•lb)
69 Nm (6.9 m•kg, 50 ft•lb)
Extent of removal
Preparation for
removal
Order
Part name
ENGINE REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Seat and fuel tank
Carburetor and carburetor joint
Exhaust pipe and silencer
Exhaust pipe stay (rear)
Clutch cable
Radiator
Spark plug
Disconnect the CDI magneto lead.
CDI unit
Reservoir tank (rear brake)
ENGINE REMOVAL
75 Nm (7.5 m•kg, 54 ft•lb)
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "SEAT, FUEL TANK AND
SIDE COVERS" section.
Refer to "CARBURETOR AND REED
VALVE" section.
Refer to "EXHAUST PIPE AND
SILENCER" section.
Disconnect at engine side.
Refer to "RADIATOR" section.
Refer to "FRONT BRAKE AND REAR
BRAKE" section in the CHAPTER 5.
4-60
ENG
85 Nm (8.5 m•kg, 61 ft•lb)
8 Nm (0.8 m•kg, 5.8 ft•lb)
Remarks