Yamaha YZ250/LC Manuel Du Propriétaire page 476

SWINGARM
EC5751B2
Swingarm
1. Install:
9
Bush 1
9
Thrust bearing 2
9
Oil seal 3
Collar 4
9
To swingarm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bushes, thrust bearings and oil seal lips.
2. Install:
9
Collar 1
To relay arm 2.
NOTE:
Apply the molybdenum disulfide grease on the
collars, bearings and oil seal lips.
3. Install:
9
Collar 1
To connecting rod 2.
NOTE:
Apply the molybdenum disulfide grease on the
collar, bearings and oil seal lips.
4. Install:
9
Connecting rod 1
9
Bolt (connecting rod) 2
9
Plain washer 3
9
Nut (connecting rod) 4
To relay arm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5-56
CHAS
80 Nm (8.0 m•kg, 58 ft•lb)