Table des Matières
Publicité
EC4M0000
ENGINE REMOVAL
34 Nm (3.4 m•kg, 24 ft•lb)
64 Nm (6.4 m•kg, 46 ft•lb)
26 Nm (2.6 m•kg, 19 ft•lb)
64 Nm (6.4 m•kg, 46 ft•lb)
å Except for USA and CDN
Extent of removal
Preparation for
removal
Order
Part name
ENGINE REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Drain the transmission oil.
Seat and fuel tank
Carburetor
Exhaust pipe and silencer
Exhaust pipe stay (rear)
Clutch cable
Radiator
Spark plug
Disconnect the CDI magneto lead.
ENGINE REMOVAL
4 Nm (0.4 m•kg, 2.9 ft•lb)
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "TRANSMISSION OIL
REPLACEMENT" section in the
CHAPTER 3.
Refer to "SEAT, FUEL TANK AND
SIDE COVERS" section.
Refer to "CARBURETOR AND REED
VALVE" section.
Refer to "EXHAUST PIPE AND
SILENCER" section.
Disconnect at engine side.
Refer to "RADIATOR" section.
4-60
ENG
5 Nm (0.5 m•kg, 3.6 ft•lb)
85 Nm (8.5 m•kg, 61 ft•lb)
75 Nm (7.5 m•kg, 54 ft•lb)
Remarks
Publicité
Table des Matières
