Table des Matières
Publicité
SWINGARM
EC575000
ASSEMBLY AND INSTALLATION
EC575202
Bearing and oil seal
1. Install:
9
Bearing 1
9
Oil seal 2
To swingarm.
NOTE:
9
Apply the molybdenum disulfide grease on the
bearing when installing.
9
Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
9
First install the outer and then the inner bear-
ings to a specified depth from inside.
Installed depth of bearings:
Outer
Inner b b : 8.5 mm (0.33 in)
2. Install:
9
Bearing 1
9
Oil seal 2
To relay arm.
NOTE:
9
Apply the molybdenum disulfide grease on the
bearing when installing.
9
Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
Installed depth of bearings a a :
5 mm (0.20 in)
3. Install:
9
Bearing 1
9
Oil seal 2
To connecting rod.
NOTE:
9
Apply the molybdenum disulfide grease on the
bearing when installing.
9
Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
Installed depth of bearings a a :
5 mm (0.20 in)
5-55
CHAS
a a : Zero mm (Zero in)
Publicité
Table des Matières
