Yamaha YZ250/LC Manuel Du Propriétaire page 478

Table des Matières

Publicité

SWINGARM
5. Install:
9
Relay arm 1
9
Bolt (relay arm) 2
9
Plain washer 3
9
Nut (relay arm) 4
To swingarm.
NOTE:
9
Apply the molybdenum disulfide grease on the
bolt.
9
Do not tighten the nut yet.
6. Install:
9
Swingarm 1
9
Pivot shaft 2
NOTE:
9
Apply the molybdenum disulfide grease on the
pivot shaft.
9
Insert the pivot shaft from right side.
7. Check:
9
Swingarm side play
Free play exists ¡ Replace thrust bearing.
9
Swingarm up and down movement b
Unsmooth
spots¡Grease or replace bearings, bushes
and collars.
8. Install:
9
Bolt (connecting rod) 1
9
Plain washer 2
9
Nut (connecting rod) 3
NOTE:
9
Apply the molybdenum disulfide grease on the
bolt.
9
Do not tighten the nut yet.
9. Install:
9
Bolt (rear shock absorber-relay arm) 1
9
Nut (rear shock absorber-relay arm) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5-57
CHAS
85 Nm (8.5 m•kg, 61 ft•lb)
a
movement/Binding/Rough
53 Nm (5.3 m•kg, 38 ft•lb)

Publicité

Table des Matières
loading

Table des Matières