Leica Geosystems Sprinter 150 Mode D'emploi page 10

Menu Setting
EN
Menus Selections (sub-selections)
DE
1. Program*
Line Levelling (BIF, BF, BFFB)
FR
ES
Cut
IT
2. Intermediate ON / OFF
PT
Sight*
NL
3. Input PtID* Input user point ID.
4. Input BM Input Reference Benchmark elevation.
NO
5. Input D.ELV*
Input design elevation in Cut & Fill application.
SV
6. Data View Data
FI
Manager* Download Data (GSI / ASCII)
DA
Delete All Data
7. Recording* Memory
Off
Ext
8. Adjustment Adjustment program.
9. Inverse Staff
ON [Inverted], OFF [Upright], AUTO
[Auto recognition of staff orientation]
User Interface
Descriptions
Select line levelling method.
& Fill Cut & Fill application.
Enable / disable Intermediate Sight in BIF line levelling.
Viewing recorded data / deleting of a recorded data by pressing ENTER key.
Transferring of recorded data to PC via RS232, in GSI-8 or ASCII format.
Deleting of all recorded data in the on-board / internal memory.
Measurement recorded to on-board / internal memory.
Measurement not stored.
Measurement recorded to external device in GSI-8 format via RS232 cable.
Recognition mode setting of staff orientation.
Sighting and measurement sequence in line levelling is indicated with
highlighted 'alphabet' of the respective line levelling icons.
In line levelling application, recording mode has to be set prior to first
backsight measurement.
7
Sprinter 150/150M/250M - 1.0.0en