Error Messages - Leica Geosystems Sprinter 150 Mode D'emploi

9.

Error Messages

No. Error message
E99 System Error, Contact
Services !
E100 Low Battery !
E101 Point No. Not Incre-
mented!
E102 Too Bright !
E103 Too Dark !
E104 No Staff !
E105 Invalid Entry!
E106 Out Of Level !
E107 Memory Full!
E108 Data File Error !
E109 Low Memory!
E110 Target Too Close !
E111 Target Too far !
E112 Too Cold !
E113 Too Hot !
Error Messages
Counter measure / causes
Hardware faults or file errors or adjustment errors or setting errors rendering instrument not working prop-
erly.
Change to new or freshly charged batteries.
Change the PtID. Max. PtID is 99999999 and do not end any 8 characters string with an alphabet char-
acter.
Darken staff or reduce lighting on staff or shade the objective telescope.
Light up staff uniformly.
Check targeting.
Check the entry / input.
Level the instrument.
Set internal memory to OFF and continue measurement without recording OR download stored data to
an external device and continue measurement with internal memory ON after deleting all recorded data
in the internal memory.
Data file error.
Prepare to download data to external device, in order to continue further measurement with recording ON
after deleting all recorded data in the internal memory.
Move staff or instrument further apart.
Move staff or instrument closer together.
Stop working, external temperature is outside the instrument operating temperature.
Stop working, external temperature is outside the instrument operating temperature.
18
Sprinter 150/150M/250M - 1.0.0en
EN
DE
FR
ES
IT
PT
NL
NO
SV
FI
DA