Check & Adjust - Leica Geosystems Sprinter 150 Mode D'emploi

8. Check & Adjust
8.1 Electronic Collimation Adjustment
A ~15m B
~15m
To activate "Adjustment" program, go to Menu\Adjustment.
Step 1: Aim at Staff A and press MEAS key. Measurement display,
press ENTER key to accept.
Step 2: Aim at Staff B and press MEAS key. Measurement display,
press ENTER key to accept.
Now shift the Sprinter towards staff A and set it up at about 3 m to
staff A.
Check & Adjust
A ~3m ~27m
Step 3: Aim at Staff B and press MEAS key. Measurement display,
press ENTER key to accept.
Step 4: Aim at Staff A and press MEAS key. Measurement display,
press ENTER key to accept.
The new electronic collimation error is displayed. To accept new
correction, press ENTER key, otherwise press ESC key to decline
adjustment result.
Optical collimation error can be corrected by adjusting the
reticle.
16
Sprinter 150/150M/250M - 1.0.0en
B
EN
DE
FR
ES
IT
PT
NL
NO
SV
FI
DA