Leica Geosystems Sprinter 150 Mode D'emploi page 14

6.3 Cut & Fill Measurement* (internal Memory active)
EN
DE
RfID: RfID:
BM1
FR
BM: BM:
100.038m
D.Elv: 0.000m D.Elv:
ES
Meas Reference Meas Reference
Change RfID, BM & Change RfID, BM &
IT
D.Elv goto menu D.Elv goto menu
PT
Measure to Bench- Go to menu update
mark with prompt Design Elevation
NL
message
NO
SV
PtID:
Elv.:
FI
Meas.Target !
:
DA
Prompt message Measurement to
measure to target target displayed
Operation
BM1
RfID :
BM1
100.038m
:
1.235m
100.500m
:
5.68m
Measurement to
Benchmark
displayed
SLAB 1
99.563 m
1.710 m
0.937 m
Step Key/Screen Description
1. Press Menu key and select Cut & Fill applica-
tion in the Program sub-menu.
2.
A message "Meas. Reference" with input
Benchmark reduced level value and Design
Elevation is displayed.
3. Press measuring key to initiate measurement
with respect to the Reference staff / Bench-
mark.
4. Reference height and distance measurement
is displayed; follow by a message "Meas.
Target!" prompted.
5.
Again, press measure key to start measure-
ment to target point.
6. The following results are displayed accord-
ingly- target reduced level (RL) / Elevation,
height of target point and cut / fill value at
target point with respect to the Design
reduced level / Design Elevation.
11
Sprinter 150/150M/250M - 1.0.0en